Professional RJ45 Crimp Tool | 078-2152/EZC

VERTICAL CABLE 078-2152/EZC – PROFESSIONAL RJ45 CRIMP TOOL FOR FEED-THROUGH PLUGS

The 078-2152/EZC is a ratchet crimp tool built for feed-through RJ45 plugs. It crimps the plug and trims the extended conductors in a single squeeze, and the built-in stripper and cutter handle cable prep, so one tool takes you from bulk cable to a finished termination. With positions for both RJ45 and RJ11 plugs and comfort-grip handles, this professional RJ45 crimp tool delivers faster, more consistent terminations.

KEY FEATURES

Here’s what makes the 078-2152/EZC a dependable crimp tool:

• Crimps and Trims in One Step: Terminates feed-through plugs and trims the extended wire so you don’t need a separate cutting step.
• Ratchet Action: Ratchet-type mechanism for better, more consistent terminations.
• RJ45 and RJ11 Termination: Handles both RJ45 and RJ11 connectors, with 8P and 6P positions on the tool head.
• Built-In Wire Stripper and Cutter: Built-in round and flat cable strippers and cutting blades.
• Heavy-Duty Professional Build: Built for daily jobsite use.
• Comfort Grip Handles: Easier on the hands during repeated crimps.
• Fast and Easy Termination: Fewer tools to carry and fewer steps per plug.

APPLICATIONS

The 078-2152/EZC is made for hands-on termination work:

• Custom-Length Patch Cords: Build RJ45 patch cords to the exact length you need.
• Field Terminations: Terminate feed-through RJ45 plugs on installed cable runs.
• Voice and Telecom Connections: Crimp RJ11 connectors for phone and voice wiring.
• Repairs and Re-Terminations: Quickly replace damaged plugs on existing cables.
• Installer and Contractor Toolkits: An all-in-one stripper, cutter, and crimper for service vehicles and tool bags.

WHY CHOOSE THE 078-2152/EZC RJ45 CRIMP TOOL?

Installers choose the 078-2152/EZC for its all-in-one design, consistent crimps, and professional build. Here are 5 reasons to add it to your toolkit:

1. Crimp and Trim in One Squeeze: Feed-through plugs are terminated and trimmed in a single motion.
2. Ratchet for Consistency: The ratchet mechanism supports a complete crimp every time.
3. Strip, Cut, and Crimp: Built-in stripper and cutter mean fewer tools on the job.
4. RJ45 and RJ11 Ready: One tool for both data and voice terminations.
5. Built for Daily Use: Heavy-duty construction and comfort grip handles keep up with a full day of crimping.

GETTING IT INSTALLED?

A few tips for clean, reliable terminations with the 078-2152/EZC:

• Match the plug to the tool. Use the plugs on the compatibility list above to ensure a proper fit and clean trim.
• Prep the cable carefully. Strip the jacket, keep the pairs twisted as close to the plug as you can (TIA-568 limits untwist at the termination to about 0.5 in or 13 mm), and arrange the conductors in your chosen T568A or T568B order.
• Feed the conductors all the way through. With feed-through plugs, the wires pass through the plug body and extend out the front before you crimp.
• Complete the full ratchet cycle. Squeeze until the ratchet releases so the plug is fully crimped.
• Check the front face and test. The conductors should be trimmed flush with the plug face. A quick wire-map test confirms the termination.

For more premium tool solutions, visit Tools and discover top-tier solutions today!